Saab 900 8 valve fuel injector lines.

Up for sale is a good used Saab 900 8 valve fuel injector line set.  These units run from the fuel injector nozzles to your fuel distributor; They are fairly fragile.  Frequently these units fail after being "disturbed" i.e. you have done something or other under the hood of the car, and now you notice a small crack in one of these lines near a fuel injector.    These are used on all Saab 99's with Bosch K-Jetronic fuel injection (1975 and up) as well as Saab 900 models, - 8 valve, turbo and non turbo from 1979 to 1988 (1988 being the last time you could buy an 8 valve Saab!) - These lines can be swapped around between #1 and #2, and #3 and #4.  So, if you buy a set of 4, and you only need one now, you will have a spare for one side, and 2 for the other.  You SHOULD have some of these on your shelf ready for a failure if you are still running an old 8 valve Saab! 

These have been NLA for years.  A cracked line usually will allow a fine mist of fuel to spray about your engine bay, and poses a serious fire hazard.  Keep your vintage Saab going with these good used injector lines!   note that there are 2 types of these lines, one that uses banjo bolts at the fuel distributor, and one that uses the same compression fittings as the fuel injectors.  You need to make sure what kind you have before ordering!  MOST of the H-motors (1982+) use compression fitting to compression fitting, while MOST of the older stuff uses banjo bolts at the fuel distributor.

Also please note, I have all the sub system fuel lines for these too, as there are several black lines that run to various components such as the warm up regulator and the cold start injector, and the fuel filter, etc.  If you need one of these please send me a note, I can see what I have!

EPC lists these lines as the following PN's -

9346685

9346693

9346701

9346719

7535040

7535057

7535065

7535073