1989 1990 MAZDA B2600i / MPV Van ECU ECM PCM G601 18 881A E2T02371 B2600i G60118881 2.6 Liter
Mitsubishi manufactured Mazda B2600 B-2600 Truck ECU
E2T02371 B2600i G601 18 881
Up for sale is a Working, in excellent condition Mazda pickup ECU. Should fit many BUT NOT ALL 89-93 models with the 2.6 Liter motor. This also fits the MPV Van in 1989 with the same 2.6 motor. - this was removed from a recent crash damaged 89 model year truck. perhaps others as well. See part numbers at the top of the listing, and MAKE SURE YOUR NUMBER MATCHES. Some of these have stand-off mounts, some don't. Difference is just in the mount brackets. See pictures.
Unit has been tested & physically inspected (capacitor failure is what typically goes wrong with these, this one looks like new internally with no signs of failure or impending failure) Most sellers won't bother to inspect for this, I do. Because I inspect them & know they are good, This unit offers a 30 day functionality warranty. As always with this type of component your best bet is to match the part number to the one on your original ECU. A faulty ECU is one of the most common no start or random stalling problems with these cars. These can also cause issues with erroneous check engine lights, idle control problems as well as emission control & cold or hot start problems. I have also seen fuel pump relay turn on faults (ECU won't turn on the fuel pump), as well as an condition where the high speed injector driver has failed. This causes the car to sit and idle fine, but it won't accelerate.If your car does not have these issues but you intend to keep it a while, I recommend our customers keep an extra ECU in the trunk. These units now have to be special ordered from most dealers new for big $$ (often times over $1000!), and you can never find one when you need one. Even now finding a good one second hand is getting to be quite difficult as these cars get older.